
INSTALLATION
Wall Mounted 0121…0661
Monobloc Wall Mounted Unit - WMA/WMF 0121-0181-0251-0281-0331-0551-0661 - Rev. 2.0. - Date: 18-07-2000 EN
7 (22)
TRANSPORT AND MOVEMENT
The unit should not be turned on its back or upside-down, or exposed to the weather and should be taken as
near as possible to the installation location before removing the cardboard packing and the pallet.
The unit can be lifted:
- with a fork-lift, placing the forks in the appropriate slots of the pallet;
- with straps passed under the unit, making sure that they do not put pressure on the upper rim of the unit.
The unit must be stored, preferably in its packing, under cover and protected from excessive humidity (< 90% R.H.)
and temperature (< 50°C).
WARNING: Units with alluminium pannelling, once positioned must be removed of packaging. Extended exposure
to the sun can cause problems in package removal.
The dimensions and weight of the unit with packaging are given below:
mm
WMF
0551
WMF
0661
M
1140 1140
O
665 665
N (*)
2284 2284
kg
320 340
N
M
O
mm
WMF
0121
WMF
0181
WMF
0251
WMF
0281
WMF
0331
M
740 740 1020 1020 1020
O
495 495 570 570 570
N (*)
2020 2020 1970 1970 1970
kg
150 167 210 210 230
(*) without pallet
Fig. 3
The symbols applied to the unit’s packaging conform to ISO7000; they are explained in the table below.
SYMBOL MEANING SYMBOL MEANING
FRAGILE: handle with care. THIS SIDE UP shows the
orientation of the unit.
PROTECT AGAINST
MOISTURE: the packaged unit
must be stored in a dry place.
-20°C
+50°C
TEMPERATURE LIMITS: the unit
must not be stored outside these
limits.
CENTRE OF GRAVITY: shows
the centre of gravity of the
packaged unit.
NO HOOKS: do not use hooks to
lift the packed unit.
KEEP AWAY FROM HEAT: the
unit must be kept away from heat
sources.
DO NOT STACK
RECEIVING THE UNIT
When the unit arrives, check that it is complete and in perfect condition; notify the carrier immediately in writing
of any damage that might have been caused in transit.
Comentarios a estos manuales